Fluid Applied Waterproofing

ALT Global
ALT offers a complete range of high quality, flexible, fully reinforced liquid applied waterproofing solutions for above and below grade applications ranging from mechanical rooms and showers to fountains and reflecting ponds. All systems are cold-applied for maximum safety and efficiency. In many cases, they may be used as recovery systems.

American Hydrotech
A Protected Membrane Roof (PMR) starting with Monolithic Membrane 6125R (MM6125R) - a fluid applied rubberized asphalt membrane applied directly to the deck. STYROFOAMR brand insulation, a highly moisture-resistant closed cell polystyrene is placed over the membrane and covered by a variety of ballast options, which provides protection from UV, temperature extremes and physical damage.

AVM Industries, LLC
is a manufacturer of ICBO and City of L.A. approved deck coatings, a complete line of decorative cements, stamped concrete overlays and the most advanced Under Tile Anti-Fracture Waterproofing Membrane in the industry.

Barrett Co.
Ram-Tough 250 sets the standard for hot-applied Rubberized Asphalt Membrane waterproofing. Composed of SBS rubber polymers, select unoxidized asphalt and a mineral filler, R.T.250 is installed at 215 mil thickness and reinforced with polyester fabric.

BASF Construction Chemicals - Building Systems
BASF Construction Chemicals is the industry leader in providing products, systems, and solutions for the construction industry. Offering more than you ever thought possible BASF has intelligent solutions for every building challenge. BASF Construction Chemicals brings you innovative products and tailored services, unparalleled access to far-reaching expertise and invaluable resources.

Carlisle Coatings and Waterproofing
Carlisle offers two below-grade, fluid-applied waterproofing solutions; CCW-525, a one-part polyurethane and CCW-703, a two-part polyurethane. These project-specific membranes provide protection on both horizontal and vertical substrates. Both products offer a variety of warranty options and are backed by Carlisle's outstanding technical support team.

CETCO
CETCO manufacturers and markets a complete line of waterproofing membranes, waterstops and installation accessories – including CoreFlex, Ultraseal, Swelltite, Voltex, Waterstop RX and CETSEAL. Backed by the industry leading HydroShield Quality Assurance Program, CETCO offers design assistance, approved applicators and independent inspection, providing customers with a total waterproofing solution.

Epro Waterproofing Systems
Application systems: concrete and block walls, blindside, beneath slab, between slab and deck. Designed with: superior strength: simplifies leak detection, reduces the effects of future movement, redundancy of protection, maximizes drainage planes, custom design for special requirements. Complete redundancy: monolithic and fully bonded barrier, multiple waterproofing barriers, multiple protection and drainage courses.

Excellent Coatings
Excellent Coatings manufactures quality acrylic waterproofing systems and decorative polymer cements for concrete and plywood substrates. The Excel-Coat Fire System is a fire retardant, waterproof deck/roof coating with an ICBO/ICC evaluation for a Class A, one hour fire rating on plywood substrates. Our polymer cements can be stamped, trowelled or sprayed to achieve decorative finishes.

Fox Industries
Since 1969, Fox Industries has manufactured a complete line of epoxy, urethane, acrylic, polyester and cementitious coatings, grouts, membranes, bonding agents and proprietary systems to restore, protect and improve concrete, steel and wood.

Henry Company
790-11 Hot Rubberized Asphalt a premier waterproofing membrane for plaza, roof gardens, and split slab applications. AQUA-BLOC®, cold applied membranes are suitable for a variety of applications. Product line includes drainage and protection boards. Combine with Henry air and weather barriers and roofing membranes for a single source watertight building envelope and LEED credits.

Insulation Solutions
AquaCheck LC400 is a single component, liquid applied, polymer modified, water based emulsion designed as an air, vapor and waterproofing coating. AquaCheck LC400 cures to form a tough, seamless, elastomeric membrane which exhibits excellent resistance to moisture transmissions. AquaCheck waterproofing products are completely VOC, HAPs and ASBESTOS free.

International Chem-Crete Corporation
Chem-Crete's unique water-based green technology products are non-toxic, non-hazardous, zero VOC moisture blockers, waterproofers and water repellents. They are sustainable product lines which offer warranted protection against freeze/thaw damage, moisture intrusion and the prevention of mold growth. Other products include epoxy coatings, epoxy injections, epoxy grouts, and cementitious repair materials.

W. R. Meadows
MEL-ROL® LM from W. R. MEADOWS is a single-component, polymer-modified, cold-applied, water-based, liquid waterproofing membrane ideal for below-grade horizontal and vertical seamless waterproofing applications. We have taken the same high quality rubber polymers found in MEADOWS’ successful MEL-ROL “peel-and-stick” membrane, and converted them into a heavy-bodied, high solids, quick drying liquid membrane.

Multicoat Corporation
The coating of the future . . . today. We offer pool, deck, concrete, floor and wall coating materials, in addition to stucco systems – systems that combine long wearing finishes with upscale appearance. Multicoat is pleased to offer the best in coating systems for all your exterior, interior, and pool renovation needs.

Multiseal Corporation
Multiguard II is an engineered protected membrane system, consisting of Multiseal 1080 hot rubberized waterproof membrane system and a Durable heavy duty asphaltic wearing course. It is suitable for exterior and interior parking decks.

Neptune Coatings
Manufacturers of the versatile WetSuit System, a fully adhered, water based, cold-spray applied, instant cure monolithic membrane. WetSuit can be sprayed to any mil thickness in a single coat creating a continuous custom membrane throughout the building envelope and a single system warranty for waterproofing, air / vapor barrier, and roofing applications.

Pacific Polymers International
In its ongoing commitment to provide the construction industry with a widely diverse line of waterproof coatings, sealants, membranes and epoxies, Pacific Polymers, Inc. has put over 40 years of successful research and development into a complete line of technically proven and tested products. In 2008, Pacific Polymers became a division of Illinois Tool Works.

Right Pointe Company
Hot applied liquid membrane is offered as a waterproofing coating for insulating concrete forms and foundations. Since 1996 we have been providing quality sealers, cures, dampproofing, cementitious patching, restoration and waterproofing products, admixtures, bonding agents and thermal & moisture protection boards.

Sto Corp.
manufacturers a complete line of fluid-applied moisture barriers including Sto Flexyl for foundations and Sto Guard for wall applications.

Tremco Sealants & Waterproofing
Product lines include high performance silicone and urethane sealants, a complete line of glazing system components, fluid- and sheet-applied waterproofing membranes, and elastomeric coatings. With experienced company representatives in every major market across the country, Tremco is uniquely positioned to provide assistance for specification development, application-specific product development, problem-solving and assistance on-site.

Urethane Polymers International
Your partner in waterproofing solutions, Urethane Polymers International has over thirty years experience in manufacturing high performance coatings that provide proven solutions to waterproofing challenges. UPI’s uniquely formulated product line of modern, high strength, synthetic materials provides economical, practical, and viable solutions to prevent the migration of water into substrates and occupied structures.