03 0555 - Concrete Admixtures/Additives


ISE Logik Industries

ISE Logik Industries
Concrete moisture vapor reduction admixture (MVRA) added directly to the ready mix concrete.  MVRA 900 permits architects and engineers to address proactively concrete moisture in the design phase at a fraction of the cost in time and money it would take after the placement and curing of concrete.


Kryton

Kryton International Inc.
Kryton International Inc. is the inventor of the crystalline waterproofing admixture and has been waterproofing concrete structures with its proprietary Krystol® technology since 1973. In 2017, Kryton acquired Cementec Industries and is now distributing Hard-Cem®, an integral (not surface applied) concrete hardener for increased abrasive and erosive wear resistance of ready-mix concrete, precast concrete and shotcrete.


Primekss North America

Primekss North America
PrimXComposite (pronounced prime x composite) is the first steel fiber-reinforced, shrink-compensating industrial concrete floor system. PrīmXComposite uses steel fibers and proprietary additive mixtures, combined with ready-mix concrete to form a composite material. Up to 60 percent thinner industrial floors than traditional concrete with a much higher load-bearing capacity.


Use 4specs As Your Free Office Library Service

Revit* Architecture family parameters or properties are based on UniFormat**. The 4specs home page combines Product Families and MasterFormat*** to help all construction professionals quickly find the manufacturers and product information they need.

Feel free to bookmark 4specs, use the 4specs home page as your browser home page or add 4specs to your office Intranet for everyone to use.
http://www.4specs.com/

*Revit by Autodesk   ***MasterFormat™ by Construction Specification Institute
**The 4specs use of UniFormat was derived from ASTM E-1557


See also:
03 0557 - Concrete Chemicals for general concrete chemicals
For complete Division 03 Concrete products and ingredients listings



ISE Logik Industries

ISE Logik Industries
Concrete moisture vapor reduction admixture (MVRA) added directly to the ready mix concrete.  MVRA 900 permits architects and engineers to address proactively concrete moisture in the design phase at a fraction of the cost in time and money it would take after the placement and curing of concrete.



Kryton

Kryton International Inc.
Kryton International Inc. is the inventor of the crystalline waterproofing admixture and has been waterproofing concrete structures with its proprietary Krystol® technology since 1973. In 2017, Kryton acquired Cementec Industries and is now distributing Hard-Cem®, an integral (not surface applied) concrete hardener for increased abrasive and erosive wear resistance of ready-mix concrete, precast concrete and shotcrete.



Primekss North America

Primekss North America
PrimXComposite (pronounced prime x composite) is the first steel fiber-reinforced, shrink-compensating industrial concrete floor system. PrīmXComposite uses steel fibers and proprietary additive mixtures, combined with ready-mix concrete to form a composite material. Up to 60 percent thinner industrial floors than traditional concrete with a much higher load-bearing capacity.