07 8400 - Firestopping & Fire-Resistive Joint Systems

(typically penetration firestopping and head-of-wall systems)


3M Firestopping

3M Fire Protection Products  Specs  CAD  BIM
3M's full line of passive fire protection solutions include products and systems for through penetration firestops, construction joints, and grease and air duct protection. All are designed to help prevent the spread of fire, smoke and noxious gases. 3M firestop solutions include the products you need to meet your fire-rated installation requirements.


Brady ProX Headers

California Expanded Metals Co.  Specs  CAD
The original slotted head-of-wall deflection track for interior and exterior walls. Sliptrack protects the integrity of walls during building movement caused by expansion and contraction, wind forces and seismic events. SLP-TRK® deflection track has been tested and earned approval for over 200 different conditions and fire-rated designs.


Emseal

Emseal Joint Systems, Ltd.  Specs  CAD
EMSHIELD is a family of UL/ULC 2079 fire-rated, multi-function, single-install expansion joint products to meet evolving building science. With EMSHIELD, EMSEAL has built the fire rating into the joint.  These single install products eliminate the need for fire-blankets, mineral wools, and fire-caulks. The EMSHIELD family of products is in use in new and retrofit joint applications on facilities worldwide.


Firestop Contractors Association

Firestop Contractors International Association  Specs
FCIA announces new Contractor Qualification Programs from FM & UL. FM Global's Approvals Division, (FM) introduced "FM 4991, Standard for Approval of Firestop Contractors" in 2001. Underwriters Laboratories, Inc., (UL)Announced the UL Qualified Firestop Contractor Program, (2007). Add "FM 4991" and "UL Qualified Firestop Contractor" to contractor qualification for an audit-tested firm installing Life Safety Firestops into Effective Compartmentation Systems.


Grabber

Grabber Construction Products
Grabber's single component smoke and fire stopping sealants for wall and floor penetrations and other constructions gap applications are available in 10 and 29 ounce cartridges, 20 ounce sausage, and 5 gallon buckets. GrabberGard fire caulks and sprays have been tested in accordance with rigorous industry standards and have been determined to be fungi resistant.


Hilti

Hilti  Specs  CAD  BIM
Hilti is a world-leader in developing innovative fastening and firestop construction products. Our experienced engineering team helps provide design engineers and architects relevant solutions and supports the design industry in code awareness and education. Please contact Hilti or visit our website to access specifications, CAD detail sheets, ICC approvals, UL systems and Engineering Judgments assistance.


National Gypsum

National Gypsum  Specs  CAD  BIM
Gold Bond® Gypsum Board, ProForm® Drywall Finishing and PermaBase® Cement Board. The distinctive purple color XP® product line represents the latest in mold, mildew and moisture resistance.  The e2XP® Extended Exposure products, also finished in purple, have a fiberglass mat designed to provide mold resistance and to withstand extreme weathering on internal and external surfaces.


Sealtite

Schul International
Schul's FR products have been tested to UL/ULC 2079 and can be supplied as +/-25% and +/-50%.  Schul's FR products are manufactured with a smoke barrier eliminating the requirement for intumescent coatings, and most can be supplied uncoated, single side coated, or double side coated; uncoated for use in concealed or secondary applications.


STI Firestop

Specified Technologies  Specs
STI - SpecSeal firestop systems for penetrations and joints. Complete range of UL listed solutions, including extensive plastic pipe and dynamic joint products and solutions - including Head-of-Wall and perimeter fire containment systems that meet the latest codes.


Tremco Firestopping

Tremco Fire Protection Systems
Tremco Fire Protection Systems Group is part of the Tremco family of sealants. The TREMstop product line features more than 400 independently tested and listed systems. Our sealants, intumescents and duct wraps are independently tested to provide the fire rating specified by architects and engineers to meet building code standards for passive fire protection.


Zero International

Zero International is an Allegion company  CAD
Intumescent materials formulated to fit the application and state-of-the-art engineered products for penetrations and exposed surfaces. Versatile, economical solutions for OEM partners who value U.S. sourcing a stable dollar-pricing. Zero can supply a two-part coating system or develop materials for your specific need. Fast turnaround on custom orders.


Use 4specs As Your Free Office Library Service

Revit* Architecture family parameters or properties are based on UniFormat**. The 4specs home page combines Product Families and MasterFormat*** to help all construction professionals quickly find the manufacturers and product information they need.

Feel free to bookmark 4specs, use the 4specs home page as your browser home page or add 4specs to your office Intranet for everyone to use.
http://www.4specs.com/

*Revit by Autodesk   ***MasterFormat™ by Construction Specification Institute
**The 4specs use of UniFormat was derived from ASTM E-1557


See also:
07 7140 - Roof Expansion Joints
07 8120 - Spray Applied Fireproofing
07 8440 - Fibrous Safing Insulation
07 8500 - Grease Duct Enclosures
07 9500 - Expansion Control - for wall and floors
09 2245 - Head-of-wall Framing Systems for top track fire-rated framing systems
26 0580 - Fire-Retardant Cable Sprays


3M Firestopping

3M Fire Protection Products  Specs  CAD  BIM
3M's full line of passive fire protection solutions include products and systems for through penetration firestops, construction joints, and grease and air duct protection. All are designed to help prevent the spread of fire, smoke and noxious gases. 3M firestop solutions include the products you need to meet your fire-rated installation requirements.



Brady ProX Headers

California Expanded Metals Co.  Specs  CAD
The original slotted head-of-wall deflection track for interior and exterior walls. Sliptrack protects the integrity of walls during building movement caused by expansion and contraction, wind forces and seismic events. SLP-TRK® deflection track has been tested and earned approval for over 200 different conditions and fire-rated designs.



Emseal

Emseal Joint Systems, Ltd.  Specs  CAD
EMSHIELD is a family of UL/ULC 2079 fire-rated, multi-function, single-install expansion joint products to meet evolving building science. With EMSHIELD, EMSEAL has built the fire rating into the joint.  These single install products eliminate the need for fire-blankets, mineral wools, and fire-caulks. The EMSHIELD family of products is in use in new and retrofit joint applications on facilities worldwide.



Grabber

Grabber Construction Products
Grabber's single component smoke and fire stopping sealants for wall and floor penetrations and other constructions gap applications are available in 10 and 29 ounce cartridges, 20 ounce sausage, and 5 gallon buckets. GrabberGard fire caulks and sprays have been tested in accordance with rigorous industry standards and have been determined to be fungi resistant.


Hilti

Hilti  Specs  CAD  BIM
Hilti is a world-leader in developing innovative fastening and firestop construction products. Our experienced engineering team helps provide design engineers and architects relevant solutions and supports the design industry in code awareness and education. Please contact Hilti or visit our website to access specifications, CAD detail sheets, ICC approvals, UL systems and Engineering Judgments assistance.



National Gypsum

National Gypsum  Specs  CAD  BIM
Gold Bond® Gypsum Board, ProForm® Drywall Finishing and PermaBase® Cement Board. The distinctive purple color XP® product line represents the latest in mold, mildew and moisture resistance.  The e2XP® Extended Exposure products, also finished in purple, have a fiberglass mat designed to provide mold resistance and to withstand extreme weathering on internal and external surfaces.



Sealtite

Schul International
Schul's FR products have been tested to UL/ULC 2079 and can be supplied as +/-25% and +/-50%.  Schul's FR products are manufactured with a smoke barrier eliminating the requirement for intumescent coatings, and most can be supplied uncoated, single side coated, or double side coated; uncoated for use in concealed or secondary applications.


STI Firestop

Specified Technologies  Specs
STI - SpecSeal firestop systems for penetrations and joints. Complete range of UL listed solutions, including extensive plastic pipe and dynamic joint products and solutions - including Head-of-Wall and perimeter fire containment systems that meet the latest codes.



Tremco Firestopping

Tremco Fire Protection Systems
Tremco Fire Protection Systems Group is part of the Tremco family of sealants. The TREMstop product line features more than 400 independently tested and listed systems. Our sealants, intumescents and duct wraps are independently tested to provide the fire rating specified by architects and engineers to meet building code standards for passive fire protection.



Zero International

Zero International is an Allegion company  CAD
Intumescent materials formulated to fit the application and state-of-the-art engineered products for penetrations and exposed surfaces. Versatile, economical solutions for OEM partners who value U.S. sourcing a stable dollar-pricing. Zero can supply a two-part coating system or develop materials for your specific need. Fast turnaround on custom orders.


 

Related Associations and Reference Organizations


Firestop Contractors Association

Firestop Contractors International Association  Specs
FCIA announces new Contractor Qualification Programs from FM & UL. FM Global's Approvals Division, (FM) introduced "FM 4991, Standard for Approval of Firestop Contractors" in 2001. Underwriters Laboratories, Inc., (UL)Announced the UL Qualified Firestop Contractor Program, (2007). Add "FM 4991" and "UL Qualified Firestop Contractor" to contractor qualification for an audit-tested firm installing Life Safety Firestops into Effective Compartmentation Systems.