07 2800 - Rainscreen Drainage Systems

(Typically installed behind siding and stucco)


Advanced Building Products

Advanced Building Products
Mortairvent® is a drainage and ventilation system specifically designed for use with stone, brick, stucco, cedar, or fiber cement siding. Moisture infiltration is inevitable, so it is important to use an effective rainscreen system that will provide a dedicated airspace between the siding and sheathing to facilitate moisture drainage and drying.


Cor-a-Vent

Cor-A-Vent  Specs  CAD
Venting behind your siding is just as necessary and valuable as venting your attic. Trapped moisture from driving rain or condensation can cause major problems. Paint peels off, exterior sheathing gets wet, siding can warp and your house wrap becomes saturated. SV-3, SV-5 & STURDI STRIPS can help prevent these problems.


Keene Building Products

Keene Building Products
Keene Building Products manufacturers 3-dimensional filament products for the building envelope market. Our building envelope products can be utilized in wall, masonry, roofing, and foundation applications to eliminate moisture issues. For Building Envelope drainage and ventilation please see our DRIWALL™ products such as weep vents, mortar collection devices, and full wall rainscreen applications.


Pactiv

Kingspan Insulation North America
GreenGuard® DC14 Drainage Mat is used to create a simple, effective and economical rainscreen system in walls clad with stucco, natural stone, masonry veneer and siding. With drainage channels on two sides, DC14 permits drainage and air movement for drying to prevent moisture accumulation in the space behind the exterior cladding.


Korax

Korax
Incorporating the KORAX panel on the exterior wall assemblies will qualify the wall as being vented rainscreen. It can be used with stucco, siding, artificial stone etc. Please contact KORAX to receive state of the art details and to answer any technical questions about the performance of the system and exterior wall assemblies in general.


Masonry Technology

Masonry Technology Incorporated  Specs  CAD
Rainscreen building envelope and basement moisture management solutions for more than 25 years. From our "True Channel" drainage plane and weep products for all veneers, to our basement drainage systems, to the only weep screed on the market that truly "weeps," we are the technology leader in building moisture management! Many have tried to copy MTI's innovative technologies, but no one does it better!


MortarNet

Mortar Net Solutions  Specs  CAD
WallNet is a 90% open weave polyester mesh that provides a continuous drainage plane behind thin and dimensional stone, thin brick, and stucco veneered walls to promote rapid drainage and drying.  It installs easily, allows moisture to easily flow to the weeps, and helps prevent mold and moisture damage.


STO

Sto Corp.  Specs  CAD  BIM Objects
Sto DrainScreen is a drainage mat between the cladding and the StoGuard seamless waterproof air barrier. Should water reach the back of the cladding it can drain from the wall assembly via the drainage mat, which also helps speed the drying of moisture-laden air (water vapor) that can accumulate in the wall assembly.


Stucoflex

Stuc-O-Flex International  Specs  CAD  BIM
Stuc-O-Flex manufactures a complete line of Rainscreen Products. Extensive selection of profile thicknesses, sizes, geometries, recycled content, with or without filter fabrics, even fabrics that function like a layer of WRB. Cutting edge computerized technology in Americas only west-coast factory assures immediate availability at extremely competitive costs.


Vaproshield

Vaproshield  CAD
WrapShield is unsurpassed in Performance. With a rating of 50 perms, WrapShield provides the highest vapor permeability in a commercial quality air barrier breather membrane, allowing for trapped interior moisture to escape reducing the risk of mold, mildew and rot.


Use 4specs As Your Free Office Library Service

Revit* Architecture family parameters or properties are based on UniFormat**. The 4specs home page combines Product Families and MasterFormat*** to help all construction professionals quickly find the manufacturers and product information they need.

Feel free to bookmark 4specs, use the 4specs home page as your browser home page or add 4specs to your office Intranet for everyone to use.
http://www.4specs.com/

*Revit by Autodesk   ***MasterFormat™ by Construction Specification Institute
**The 4specs use of UniFormat was derived from ASTM E-1557


See also:
04 0530 - Masonry Flashing and Specialties - for rainscreen darinage behind brick
07 2400 - Exterior Insulation and Finish Systems (EIFS) for proprietary systems
07 2500 - Weather Barriers
07 4800 - Rainscreens (typically metal and terracotta surfaced systems)


Advanced Building Products

Advanced Building Products
Mortairvent® is a drainage and ventilation system specifically designed for use with stone, brick, stucco, cedar, or fiber cement siding. Moisture infiltration is inevitable, so it is important to use an effective rainscreen system that will provide a dedicated airspace between the siding and sheathing to facilitate moisture drainage and drying.


Cor-a-Vent

Cor-A-Vent  Specs  CAD
Venting behind your siding is just as necessary and valuable as venting your attic. Trapped moisture from driving rain or condensation can cause major problems. Paint peels off, exterior sheathing gets wet, siding can warp and your house wrap becomes saturated. SV-3, SV-5 & STURDI STRIPS can help prevent these problems.



Keene Building Products

Keene Building Products
Keene Building Products manufacturers 3-dimensional filament products for the building envelope market. Our building envelope products can be utilized in wall, masonry, roofing, and foundation applications to eliminate moisture issues. For Building Envelope drainage and ventilation please see our DRIWALL™ products such as weep vents, mortar collection devices, and full wall rainscreen applications.


Pactiv

Kingspan Insulation North America
GreenGuard® DC14 Drainage Mat is used to create a simple, effective and economical rainscreen system in walls clad with stucco, natural stone, masonry veneer and siding. With drainage channels on two sides, DC14 permits drainage and air movement for drying to prevent moisture accumulation in the space behind the exterior cladding.


Korax

Korax
Incorporating the KORAX panel on the exterior wall assemblies will qualify the wall as being vented rainscreen. It can be used with stucco, siding, artificial stone etc. Please contact KORAX to receive state of the art details and to answer any technical questions about the performance of the system and exterior wall assemblies in general.


Masonry Technology

Masonry Technology Incorporated  Specs  CAD
MTI designs and manufactures "weeps" and "drainage planes" for masonry walls. Only MTI products put the tunnel "weep" holes at the lowest point of the wall, at the top of the flashing-where the water is! MTI's system allows moisture to get from a high point to a low point as quickly as possible.


MortarNet

Mortar Net Solutions  Specs  CAD
WallNet is a 90% open weave polyester mesh that provides a continuous drainage plane behind thin and dimensional stone, thin brick, and stucco veneered walls to promote rapid drainage and drying.  It installs easily, allows moisture to easily flow to the weeps, and helps prevent mold and moisture damage.



STO

Sto Corp.  Specs  CAD  BIM Objects
Sto DrainScreen is a drainage mat between the cladding and the StoGuard seamless waterproof air barrier. Should water reach the back of the cladding it can drain from the wall assembly via the drainage mat, which also helps speed the drying of moisture-laden air (water vapor) that can accumulate in the wall assembly.


Stucoflex

Stuc-O-Flex International  Specs  CAD  BIM
Stuc-O-Flex manufactures a complete line of Rainscreen Products. Extensive selection of profile thicknesses, sizes, geometries, recycled content, with or without filter fabrics, even fabrics that function like a layer of WRB. Cutting edge computerized technology in Americas only west-coast factory assures immediate availability at extremely competitive costs.


Vaproshield

Vaproshield  CAD
WrapShield is unsurpassed in Performance. With a rating of 50 perms, WrapShield provides the highest vapor permeability in a commercial quality air barrier breather membrane, allowing for trapped interior moisture to escape reducing the risk of mold, mildew and rot.