Masonry Flashing and Accessories

Advanced Building Products
Advanced Building Products is proud to introduce our patented non-asphaltic copper thru-wall flashing, Copper Sealtite 2000 and pre-fabricated Cop-R-Corners. Along with our widely specified Mortar Break® mortar deflection, Advanced has earned a solid reputation for providing a high quality waterproofing system at affordable prices.

BoMetals
BoMetals has earned a reputation in the concrete and masonry accessory market for continuous innovation and enthusiastic customer service. Along with many concrete accessories, we manufacture a variety of PVC and rubber control joint profiles to meet the needs of any job. Other masonry products include weep tubes, masonry block caps, and dovetail anchor slots.

Carlisle Coatings and Waterproofing
CCW offers three distinct product catagories providing a “Single System Solution.” CCW's Air & Vapor Barriers are asphalt-based sheet, spray-applied membranes and multi-layered geomembranes that provide the convenience of quick application and the lasting benefits of using quality materials.

CavClear®
Total-Wall Airspace & Moisture Control - CavClear®, the total-wall air space control system, prevents mortar droppings, mortar bridging, and weep vent obstructions, as well as protection against mold, mildew and other moisture-related failures in masonry walls. CavClear® products are installed throughout the full height of brick and stone masonry applications, 100% recycled and is Energy Star and LEED rated.

Hohmann & Barnard
Founded in 1933, Hohmann & Barnard is known worldwide for quality fabrication and innovative design of masonry anchor and reinforcement systems. Our product line includes numerous established anchors and reinforcements, as well as flashings, control joints & air barriers. Hohmann & Barnard is committed to enhancing and promoting the benefits of environmentally sound, masonry wall construction.

Illinois Products Corporation
The IPCO Flashing System includes IPCO’s 30 and 40 mil. self-adhesive rubberized asphalt flashing, pre-formed flashing corners and end dams, stainless steel or copper drip edge, stainless steel cavity bridges, PVC termination bar and adjustable weep vents to create an easy to install and complete system that provides greater protection from moisture and mold problems in masonry walls .

Keene Building Products
Keene Building Products™ manufactures 3-dimensional products for moisture, drainage and ventilation. Keene’s DRIWALL™ products work in wall, masonry, foundation and plaza applications to eliminate moisture problems. Solutions for masonry applications also include weep vents, mortar collection devices and full wall Rainscreen applications. Keene is “Creating Comfortable Space."

Masonry Technology Incorporated
MTI designs and manufactures "weeps" and "drainage planes" for masonry walls. Only MTI products put the tunnel "weep" holes at the lowest point of the wall, at the top of the flashing-where the water is! MTI's system allows moisture to get from a high point to a low point as quickly as possible.

Mortar Net USA
Cavity Wall Drainage System - New Innovative, Patented TOTALFlash™ - A historic breakthrough for controlling moisture-damage and mold-growth in masonry cavity walls. ALL the “best practices” of today’s moisture-control arrive pre-assembled onto handy, 5-ft. panels of pre-cut flexible flashing. Built-in termination bar, edge-dam, no-clog drainage mattes, weep tabs, stainless steel drip-edge, clearly specified lap-joints.

Polyguard Products
We began with Polyguard 650 membrane waterproofing, a product which by the mid 1990's was specified worldwide for foundations and plaza deck protection. In the 1980's we moved above grade, protecting the building envelope with products for roofing, walls, flashing, decks, and tile underlayments.

Sandell Manufacturing Company
The permanent solution in moisture protection for the commercial & residential industry.

ThermaDrain
ThermaDrain Insulated Drainage Board provides a higher R-Value than traditional cavity wall systems and better moisture drainage from the top to bottom. By design, it is the best defense to prevent mortar blockage in cavity walls and to maximize wall drainage and energy efficiency. One step system makes installation easy. Available with polyisocyanurate or extruded polystyrene insulation.

WIRE-BOND
WIRE-BOND® has set the standard for developing innovative wall flashing products for more than three decades. We are constantly developing new products designed for ease of installation, time and labor cost savings, and maximum strength and durability. We offer the complete line of wall reinforcement products and accessories through a nationwide network of dealers.

Wonder Metals Corp.
specializing in the fabrication of louvers, dampers & penthouses for over 40 years, including nonstandard shapes, custom blade designs and copper, stainless steel & brass. Creating efficiency that starts with your first contact and continues through production and delivery.

York Manufacturing
Multi-Flash 500™ non-asphaltic copper fabric flashing eliminates the requirement for drip edges and Flash-Vent™ copper fabric flashing, with its integral drainage plane, eliminates the requirement for both drip edges and mortar collection devices. These copper thru-wall flashings offer the uncommon combination of being both the high quality component and the low cost solution.