08 3930 - Blast Resistant Doors


Ambico

AMBICO
Manufacturers since 1955 of blast resistant products from a low range of 15 PSF (2 kpa) to over 50 PSI (350 kpa). Fire labeled products tested compliant with NFPA-80 (UL, WHI.) Light weight blast resistant products are readily available complete with builders hardware, providing ease-of-operation. Units available with factory pre-installed blast-resistant glazing.


Krieger Specialty Doors

Krieger Specialty Products  Specs  CAD
Custom manufactured blast and pressure resistant doors available up to 20 PSI. Tested and certified according to UFC, UBC, ICBO, FM, NIJ, TM5, ASTM, and Haz Mat. Clients include Pentagon, General Motors, Chevron, US Air Force and Boeing.


Megamet Industries

Megamet Industries  Contact Us  Specs  BIM
Custom hollow metal doors and frames. Quick delivery of products fabricated in the USA is our specialty. Advanced forming and welding technologies enable consistent capability. Our "MegaSonic" and "MegaSafe" lines feature unique designs for acoustic, impact, ballistic, pressure, and other life-safety solutions. MegaMet Blast Doors comply with UFC 4-010-01, ASTM F2247 - 2011, and DoS SD-STD-01.01, Revision G.


Protective Door Industries

Protective Door Industries
PDI's Sonicbar® blast and airtight doors assure protection and dependable service under critical conditions. PDI certifies the entire assembly and analyzes the criteria to construct a door panel that is thin and light as possible. All swing doors contain latchsets, frame, anchorage and hinges and all sliding doors include blast restraints, tracks/trolleys and other components.


Stiles Custom Metals

Stiles Custom Metal  LEED
Stiles builds doors to your exact specifications. We afford a remarkable degree of design freedom, primarily in non-typical situations where a standard-sized product in inappropriate. With a solid reputation for producing the finest built-to-order steel, stainless steel and bronze doors and window systems in the world, Stiles consistently delivers on-time and at a reasonable cost.


C.R. Laurence - U.S. Aluminum

U.S. Aluminum  Contact Us  Specs  CAD
U.S. Aluminum Blast Resistant Entrance Systems are engineered and successfully tested to withstand blast pressure levels of one to six pounds per square inch. Made in the U.S.A., these systems are tested to perform in accordance with DoD, GSA, and ASTM Protocols.


BPM Select

The most comprehensive
building product search tool
on the web.

     


Ambico

AMBICO
Manufacturers since 1955 of blast resistant products from a low range of 15 PSF (2 kpa) to over 50 PSI (350 kpa). Fire labeled products tested compliant with NFPA-80 (UL, WHI.) Light weight blast resistant products are readily available complete with builders hardware, providing ease-of-operation. Units available with factory pre-installed blast-resistant glazing.



Krieger Specialty Doors

Krieger Specialty Products  Specs  CAD
Custom manufactured blast and pressure resistant doors available up to 20 PSI. Tested and certified according to UFC, UBC, ICBO, FM, NIJ, TM5, ASTM, and Haz Mat. Clients include Pentagon, General Motors, Chevron, US Air Force and Boeing.


Megamet Industries

Megamet Industries  Contact Us  Specs  BIM
Custom hollow metal doors and frames. Quick delivery of products fabricated in the USA is our specialty. Advanced forming and welding technologies enable consistent capability. Our "MegaSonic" and "MegaSafe" lines feature unique designs for acoustic, impact, ballistic, pressure, and other life-safety solutions. MegaMet Blast Doors comply with UFC 4-010-01, ASTM F2247 - 2011, and DoS SD-STD-01.01, Revision G.



Protective Door Industries

Protective Door Industries
PDI's Sonicbar® blast and airtight doors assure protection and dependable service under critical conditions. PDI certifies the entire assembly and analyzes the criteria to construct a door panel that is thin and light as possible. All swing doors contain latchsets, frame, anchorage and hinges and all sliding doors include blast restraints, tracks/trolleys and other components.



Stiles Custom Metals

Stiles Custom Metal  LEED
Stiles builds doors to your exact specifications. We afford a remarkable degree of design freedom, primarily in non-typical situations where a standard-sized product in inappropriate. With a solid reputation for producing the finest built-to-order steel, stainless steel and bronze doors and window systems in the world, Stiles consistently delivers on-time and at a reasonable cost.


C.R. Laurence - U.S. Aluminum

U.S. Aluminum  Contact Us  Specs  CAD
U.S. Aluminum Blast Resistant Entrance Systems are engineered and successfully tested to withstand blast pressure levels of one to six pounds per square inch. Made in the U.S.A., these systems are tested to perform in accordance with DoD, GSA, and ASTM Protocols.