09 2400 - Portland Cement Plaster (Stucco)


BMI Products

BMI Products
BMI Products is the home of the signature silo system that provides preblended quality materials in on-the-job-site silos or by the bag, saving time, money and cleanup. With fully automatic mixers and pumps, contractors, owners and architects realize benefits that help increase production on the construction site.


ElRey Stucco

El Rey Stucco  Specs
(primarily UT, NM, CO)
was founded in 1968. We manufacture one of the most complete lines of Portland cement stucco and EIFS wall systems available from any single source.


Finestone

Finestone
Finestone® has played a significant role in the EIFS and stucco marketplace for over 25 years. Consistently providing high-quality products and superior technical service, we have enjoyed a long and successful track record, and earned the loyalty of architects, distributors, and the most demanding applicators in the United States.


La Habra

La Habra Products
Since 1926, LaHabra has been the leading manufacture of premium acrylic and cementitious stucco products. Using highest quality raw materials, we produce state-of-the-art hard-coat stucco setting new standards for superior quality products, consistency, reliability and outstanding customer service. LaHabra Wall finish coat can be applied 24 hours after installation over foam installation board/exterior sheathing.


Larsen

Larsen Products Corp.
Plaster-Weld® is a high performance bonding agent which prepares any structurally sound surface - including concrete, brick, block, glass, ceramic tile, wallboard and metals - to receive one-coat finish plaster and/or two and three coat plaster work. Even painted and papered drywall can be resurfaced easily and at less cost than installing new drywall.


Master Wall

Master Wall  Specs  CAD
Since 1987, Master Wall Inc. has manufactured the best quality products and is the fastest growing manufacturer of Exterior Insulation and Finish Systems (EIFS), Drainage Systems, One Coat Stucco (OCS) and Elastomeric Coatings. Crafted by people who care about the industry, Master Wall offers full product support from sales to technical assistance and plan reviews.


Mediterranean Colors

Mediterranean Colors, LLC  Specs  CAD
A good stucco finish system should absorb structural movements, withstand thermal cycles, repel air / water pollution, sustain waterproofing capability, be vapor permeable, and age elegantly.  eco stucco™ exceed these expectations over a wide array of substrates: concrete, masonry, gypsum, and lath - newly built or in need of renovation.


Merlex

Merlex Stucco  Specs
Premium products. Premium service. Quality exterior stucco, Basex crack-reduction system, MX acrylic finish, Poly Prep EPS foam coating... Merlex has a full line of products for any cement plaster assembly. Family owned since 1963, we give top service and attention to every customer, use only the finest quality raw materials, and provide the best color matches in the industry.


Omega Products

Omega Products International  Specs  CAD
Omega Products International is a leader in the manufacturing of stucco, acrylic finishes, one coat stucco, EIFS, bonders, admixtures, sealers, and related products. With the largest and most diverse product line in the industry, Omega has the capability to meet your needs for any construction project. Our superior quality and service is unrivaled in the industry, making Omega the Professional's Choice for over 35 years.


Parex

Parex  Specs  CAD
Parex is a leading EIFS, stucco, commercial plaster and architectural coating brand with products designed for commercial, institutional and residential buildings in new construction and retrofit.  Whether for high impact, moisture control, or fast installation, Parex has the right combination of products for your projects


Senergy

Senergy  CAD
Senergy® offers 15 different wall systems that each provide the "stucco look," including EIFS with drainage, stucco, textured acrylic surfacing systems and Cement-Board Stucco™ wall systems. Since 1979, the Senergy team has helped customers design and construct the most beautiful and enduring buildings possible.


SPEC-MIX

SPEC MIX
SPEC MIX, Inc. is North America's premier producer of prepackaged high performance cement-based products serving the construction materials industry. When architects, specifiers and engineers create projects requiring solutions including 1-coat and traditional 3-coat stucco applications, the SPEC MIX team of local product specialists across North America delivers the answers AND the products.


STO

Sto Corp.  Specs  CAD  BIM Objects
Sto Powerwall® offers high quality, durable Portland Cement Plaster systems that include elastomeric coatings that expand and contract with the building, bridging hairline cracks and preventing moisture from getting into the wall. Sto Corp. supports the systems with warranties, technical support, and local distribution.


Stucoflex

Stuc-O-Flex International  Specs  CAD  BIM
An enhanced stucco system configured with a back ventilated rainscreen cavity that captures intruding moisture and immediately transfers it back to the buildings exterior. The system incorporates a WRB, WaterWay Rainscreen creating the capillary break, stucco and Stuc-O-Flex Elastomeric Acrylic Finish. This system answers increasing demand for envelope integrity while reducing problems with moisture penetration.


Teifs

Teifs Wall Systems  Specs  CAD
(primarily TX, OK, AR, LA, AL)

Teifs is a leading EIFS, stucco, commercial plaster and architectural coating brand with products designed for commercial, institutional and residential buildings in new construction and retrofit.  Whether for high impact, moisture control, or fast installation, Teifs has the right combination of products for your projects.  Member of EIMA


Use 4specs As Your Free Office Library Service

Revit* Architecture family parameters or properties are based on UniFormat**. The 4specs home page combines Product Families and MasterFormat*** to help all construction professionals quickly find the manufacturers and product information they need.

Feel free to bookmark 4specs, use the 4specs home page as your browser home page or add 4specs to your office Intranet for everyone to use.
http://www.4specs.com/

*Revit by Autodesk   ***MasterFormat™ by Construction Specification Institute
**The 4specs use of UniFormat was derived from ASTM E-1557


See also:
03 0551 - Concrete Bonding Agents
04 7300 - Manufactured Stone
07 2400 - Exterior Insulation and Finish Systems (EIFS) for acrylic finishes over stucco
07 2450 - EIFS Specialties (Includes trim, foam shapes and fasteners)
07 2800 - Rainscreen Drainage Systems
09 2220 - Furring and Lathing
09 2500 - Venetian & Other Plasters
09 9720 - Elastomeric Coatings for Walls



BMI Products

BMI Products
BMI Products is the home of the signature silo system that provides preblended quality materials in on-the-job-site silos or by the bag, saving time, money and cleanup. With fully automatic mixers and pumps, contractors, owners and architects realize benefits that help increase production on the construction site.



ElRey Stucco

El Rey Stucco  Specs
(primarily UT, NM, CO)
was founded in 1968. We manufacture one of the most complete lines of Portland cement stucco and EIFS wall systems available from any single source.



Finestone

Finestone
Finestone® has played a significant role in the EIFS and stucco marketplace for over 25 years. Consistently providing high-quality products and superior technical service, we have enjoyed a long and successful track record, and earned the loyalty of architects, distributors, and the most demanding applicators in the United States.



La Habra

La Habra Products
Since 1926, LaHabra has been the leading manufacture of premium acrylic and cementitious stucco products. Using highest quality raw materials, we produce state-of-the-art hard-coat stucco setting new standards for superior quality products, consistency, reliability and outstanding customer service. LaHabra Wall finish coat can be applied 24 hours after installation over foam installation board/exterior sheathing.


Larsen

Larsen Products Corp.
Plaster-Weld® is a high performance bonding agent which prepares any structurally sound surface - including concrete, brick, block, glass, ceramic tile, wallboard and metals - to receive one-coat finish plaster and/or two and three coat plaster work. Even painted and papered drywall can be resurfaced easily and at less cost than installing new drywall.


Master Wall

Master Wall  Specs  CAD
Since 1987, Master Wall Inc. has manufactured the best quality products and is the fastest growing manufacturer of Exterior Insulation and Finish Systems (EIFS), Drainage Systems, One Coat Stucco (OCS) and Elastomeric Coatings. Crafted by people who care about the industry, Master Wall offers full product support from sales to technical assistance and plan reviews.


Mediterranean Colors

Mediterranean Colors, LLC  Specs  CAD
A good stucco finish system should absorb structural movements, withstand thermal cycles, repel air / water pollution, sustain waterproofing capability, be vapor permeable, and age elegantly.  eco stucco™ exceed these expectations over a wide array of substrates: concrete, masonry, gypsum, and lath - newly built or in need of renovation.


Merlex

Merlex Stucco  Specs
Premium products. Premium service. Quality exterior stucco, Basex crack-reduction system, MX acrylic finish, Poly Prep EPS foam coating... Merlex has a full line of products for any cement plaster assembly. Family owned since 1963, we give top service and attention to every customer, use only the finest quality raw materials, and provide the best color matches in the industry.



Omega Products

Omega Products International  Specs  CAD
Omega Products International is a leader in the manufacturing of stucco, acrylic finishes, one coat stucco, EIFS, bonders, admixtures, sealers, and related products. With the largest and most diverse product line in the industry, Omega has the capability to meet your needs for any construction project. Our superior quality and service is unrivaled in the industry, making Omega the Professional's Choice for over 35 years.


Parex

Parex  Specs  CAD
Parex is a leading EIFS, stucco, commercial plaster and architectural coating brand with products designed for commercial, institutional and residential buildings in new construction and retrofit.  Whether for high impact, moisture control, or fast installation, Parex has the right combination of products for your projects



Senergy

Senergy  CAD
Senergy® offers 15 different wall systems that each provide the "stucco look," including EIFS with drainage, stucco, textured acrylic surfacing systems and Cement-Board Stucco™ wall systems. Since 1979, the Senergy team has helped customers design and construct the most beautiful and enduring buildings possible.



SPEC-MIX

SPEC MIX
SPEC MIX, Inc. is North America's premier producer of prepackaged high performance cement-based products serving the construction materials industry. When architects, specifiers and engineers create projects requiring solutions including 1-coat and traditional 3-coat stucco applications, the SPEC MIX team of local product specialists across North America delivers the answers AND the products.


STO

Sto Corp.  Specs  CAD  BIM Objects
Sto Powerwall® offers high quality, durable Portland Cement Plaster systems that include elastomeric coatings that expand and contract with the building, bridging hairline cracks and preventing moisture from getting into the wall. Sto Corp. supports the systems with warranties, technical support, and local distribution.


Stucoflex

Stuc-O-Flex International  Specs  CAD  BIM
An enhanced stucco system configured with a back ventilated rainscreen cavity that captures intruding moisture and immediately transfers it back to the buildings exterior. The system incorporates a WRB, WaterWay Rainscreen creating the capillary break, stucco and StucOFlex Elastomeric Acrylic Finish. This system answers increasing demand for envelope integrity while reducing problems with moisture penetration.


Teifs

Teifs Wall Systems  Specs  CAD
(primarily TX, OK, AR, LA, AL)

Teifs is a leading EIFS, stucco, commercial plaster and architectural coating brand with products designed for commercial, institutional and residential buildings in new construction and retrofit.  Whether for high impact, moisture control, or fast installation, Teifs has the right combination of products for your projects.  Member of EIMA


 

Related Associations and Reference Organizations