08 5670 - Blast Resistant Windows

(Includes blast resistant storefronts and curtainwalls)


Ambico

AMBICO
AMBICO blast resistant windows, screens and side lite units are available to meet ATFP (UFC), petrochemical (PIP) and industrial applications, with shock tube testing in accordance with ASTM F1642. Products are engineered to meet the most demanding blast requirements with the lightest construction possible. Units are supplied with all glass and glazing components as complete engineered assemblies.


Krieger Specialty Doors

Krieger Specialty Products  Specs  CAD
Custom manufactured blast and pressure resistant windows available up to 20 PSI. Tested and certified according to UFC, UBC, ICBO, FM, NIJ, ASTM, and Haz Mat. Clients include Pentagon, General Motors, Chevron, US Air Force and Boeing.


Protective Door Industries

Protective Door Industries
PDI's Sonicbar® blast and airtight doors assure protection and dependable service under critical conditions. PDI certifies the entire assembly and analyzes the criteria to construct a door panel that is thin and light as possible. All swing doors contain latchsets, frame, anchorage and hinges and all sliding doors include blast restraints, tracks/trolleys and other components.


Therm-O-Lite

Thermolite
Thermolite Window Systems provides superior energy savings to all other window systems. Buildings will see a 20% reduction in total building energy consumption and even larger demand reduction. Our hurricane window system (Storm Series) has saved building assets on the gulf coast and our blast window system (Safety Series) is specified in many federal agencies.


C.R. Laurence - U.S. Aluminum

U.S. Aluminum
U.S. Aluminum offers Blast Resistant Windows that are tough enough to meet blast mitigation requirements. The Defender Series of Blast Mitigation products are designed to provide protection for DoD and private sector facilities. Our other Defender Series products include Storefront, Curtain Wall, Projected Windows, Horizontal Sliding, and Single Hung Windows. Made in the U.S.A.


Wellbilt

Wellbilt
The Sure-Board Wall Panel is a structural, load bearing wall panel. Sure-Board® is a steel sheet bonded with specified substrates (gypsum board, exterior gypsum sheathing, Fiberock, etc.) that is installed on shear walls at points requiring shear. Sure-Board® eliminates use of excess materials and labor. It also lowers your cost and increases your hurricane protection. Blast & ballistic protection may be designed and acquired for the same area, with the same product.


YKK America

YKK AP America
YKK AP windows with the Protek® hurricane and blast mitigating designation are designed to protect buildings from the impacts of hurricanes and man-made disasters. These building systems have been independently tested to the requirements of ASTM E 1886, ASTM E 1996, and the test requirements for the Florida High Velocity Hurricane Zone (TAS 201, TAS 202, & TAS 203).


Use 4specs As Your Free Office Library Service

Revit* Architecture family parameters or properties are based on UniFormat**. The 4specs home page combines Product Families and MasterFormat*** to help all construction professionals quickly find the manufacturers and product information they need.

Feel free to bookmark 4specs, use the 4specs home page as your browser home page or add 4specs to your office Intranet for everyone to use.
http://www.4specs.com/

*Revit by Autodesk   ***MasterFormat™ by Construction Specification Institute
**The 4specs use of UniFormat was derived from ASTM E-1557



Ambico

AMBICO
AMBICO blast resistant windows, screens and side lite units are available to meet ATFP (UFC), petrochemical (PIP) and industrial applications, with shock tube testing in accordance with ASTM F1642. Products are engineered to meet the most demanding blast requirements with the lightest construction possible. Units are supplied with all glass and glazing components as complete engineered assemblies.



Krieger Specialty Doors

Krieger Specialty Products  Specs  CAD
Custom manufactured blast and pressure resistant windows available up to 20 PSI. Tested and certified according to UFC, UBC, ICBO, FM, NIJ, ASTM, and Haz Mat. Clients include Pentagon, General Motors, Chevron, US Air Force and Boeing.



Protective Door Industries

Protective Door Industries
PDI's Sonicbar® blast and airtight doors assure protection and dependable service under critical conditions. PDI certifies the entire assembly and analyzes the criteria to construct a door panel that is thin and light as possible. All swing doors contain latchsets, frame, anchorage and hinges and all sliding doors include blast restraints, tracks/trolleys and other components.



Therm-O-Lite

Thermolite
Thermolite Window Systems provides superior energy savings to all other window systems. Buildings will see a 20% reduction in total building energy consumption and even larger demand reduction. Our hurricane window system (Storm Series) has saved building assets on the gulf coast and our blast window system (Safety Series) is specified in many federal agencies.



C.R. Laurence - U.S. Aluminum

U.S. Aluminum
U.S. Aluminum offers Blast Resistant Windows that are tough enough to meet blast mitigation requirements. The Defender Series of Blast Mitigation products are designed to provide protection for DoD and private sector facilities. Our other Defender Series products include Storefront, Curtain Wall, Projected Windows, Horizontal Sliding, and Single Hung Windows. Made in the U.S.A.



Wellbilt

Wellbilt
The Sure-Board Wall Panel is a structural, load bearing wall panel. Sure-Board® is a steel sheet bonded with specified substrates (gypsum board, exterior gypsum sheathing, Fiberock, etc.) that is installed on shear walls at points requiring shear. Sure-Board® eliminates use of excess materials and labor. It also lowers your cost and increases your hurricane protection. Blast & ballistic protection may be designed and acquired for the same area, with the same product.



YKK America

YKK AP America
YKK AP windows with the Protek® hurricane and blast mitigating designation are designed to protect buildings from the impacts of hurricanes and man-made disasters. These building systems have been independently tested to the requirements of ASTM E 1886, ASTM E 1996, and the test requirements for the Florida High Velocity Hurricane Zone (TAS 201, TAS 202, & TAS 203).